Intelligent Panel Systems · Product technical details
Terrix brick slips on SulfRock boards
- Terrix names SulfRock boards in its guidance for brick slips on timber or steel frames.
- For IPS panels, the guidance concerns the SulfRock facing. The complete IPS wall build-up and panel joints require separate assessment.
- Minimum dry pull-off strength at the board face: 0.25 MPa. Verify using board-specific manufacturer data or on-site pull-off tests.
- Confirm the board thickness and fixing pattern against the board manufacturer’s façade specification.
- The wall must be sufficiently airtight and resist dead load and wind suction. Provide a continuous weather-resistive barrier and correctly detailed flashings.
Source: PCC Terrix (Europe), brick-slip substrate guidance, 2026, pp. 2–3.